12.4 More About Energy in SHM

Derive compact quantitative formulas linking displacement, velocity, acceleration, and energy so mixed-data SHM problems can be solved quickly.

About 34 minSyllabus C.1HL only

From x(t) and v(t) to Direct Energy Formulas

Starting from x=Asin⁡(ωt+ϕ)x = A\sin(\omega t + \phi) and v=ωAcos⁡(ωt+ϕ)v = \omega A\cos(\omega t + \phi), the identity sin⁡2+cos⁡2=1\sin^2 + \cos^2 = 1 leads directly to compact SHM energy forms. These are powerful because they remove explicit time dependence and let you solve from geometric state alone.

ET=12mω2A2,Ep=12mω2x2,Ek=12mω2(A2−x2)E_T = \frac{1}{2}m\omega^2A^2, \quad E_p = \frac{1}{2}m\omega^2x^2, \quad E_k = \frac{1}{2}m\omega^2(A^2-x^2)

These forms are equivalent to spring forms when omega^2 = k/m.

Notice how each formula encodes physical boundaries: at x=0x = 0, kinetic is maximum; at ∣x∣=A|x| = A, kinetic is zero; and total energy never depends on time in the ideal model. That boundary-check habit is a fast way to catch algebra slips before final answers.

Velocity as a Function of Displacement

v=±ωA2−x2v = \pm \omega\sqrt{A^2-x^2}

The sign is positive or negative depending on travel direction through the same displacement point.

This formula is especially useful when time is absent from a question. If you know displacement and model parameters, you can compute speed immediately. If direction is required, combine with motion context or displacement-time slope sign to choose plus or minus.

Recovering Unknowns from Maximum Values

vmax⁡=ωA,amax⁡=ω2A,ω=amax⁡vmax⁡,A=vmax⁡2amax⁡v_{\max}=\omega A, \quad a_{\max}=\omega^2A, \quad \omega=\frac{a_{\max}}{v_{\max}}, \quad A=\frac{v_{\max}^2}{a_{\max}}

These transformations turn mixed 'max speed/max acceleration' data into period and amplitude quickly.

This data-compression pattern appears frequently in structured-response tasks. Once ω\omega is found, period follows from T=2π/ωT = 2\pi/\omega. Once amplitude is found, any other state quantity can be computed. Treat vmax⁡v_{\max} and amax⁡a_{\max} as a compact signature of one oscillator.

Simulation: Quantitative Energy and Speed-Displacement Checks

Stress-test the formulas E_k(x), E_p(x), and v(x) by moving the oscillator through the cycle and verifying consistency at turning points and equilibrium.

Period (spring)

0.811 s

Frequency

1.233 Hz

Angular frequency

7.746 rad/s

Period (pendulum, small angle)

2.457 s

E_p / E_TE_k / E_T-A0+A

Total energy

0.4116 J

Potential energy

0.4108 J (99.8%)

Kinetic energy

8.47e-4 J (0.2%)

In ideal SHM, E_T remains constant while energy shifts between E_p and E_k. At equilibrium (x = 0) kinetic energy is maximum; at turning points (|x| = A) potential energy is maximum.

Check yourself

An oscillator has vmax = 3.2 m/s and amax = 25 m/s^2. Enter the period in seconds.

Hint: First compute ω=amax⁡/vmax⁡\omega = a_{\max}/v_{\max}, then T=2π/ωT = 2\pi/\omega.

Practice questions on this topic